随机控制系统大纯时滞辨识及结构辨识的偏差补偿算法

本文研究了已知噪声自相关函数时,线性SISO系统ARMAX模型的大纯时滞的辨识问题及结构与参数辨识的偏差补偿算法。本算法使得能够在很小的样本数及极低的信噪比下得到系统的结构参数。     

关于小高炮射击偏差观测方法之我见

小高炮射击偏差观测的提前时间观测时机法与传统的等距法,两者的观测时机虽不同,精度也不同,但从原理上讲,都是一种近似方法,不能说哪个原理上有问题,哪个原理上无问题。从部队现装备看,在部队日常训练打靶中,前者的观测时机更易于把握,作为现装备的一种革新,有研究必要。     

高可靠、强实时分布式系统的切换技术研究

本文首先给出某高可靠、强实时分布式系统及系统的两种切换方案的简要描述，然后对切换技术的实现进行讨论；最后，在建立强实时双工系统的可靠性模型基础上，对系统的两种切换方案进行分析与比较。研究结果表明：对于本系统，机组级切换优于结点机级切换，且可以减少程序的复杂度，提高系统的可靠性与实时性。     

随机环境中的M/MY/1排队系统

文献［４］讨论了随机环境中的Ｍ／Ｍ／１排队模型，本文提出和讨论随机环境中的Ｍ／Ｍｙ／１排队模型，在统计平衡条件下给出了队长和等待队长的平稳分布以及平均队长和平均等待队长，得到了等待时间和逗留时间分布以及平均等待时间和平均逗留时间。     

基于时间序列分析的火灾发生规律研究

在时间序列分析建模思想的基础上,基于全国2007年24小时火灾起数建立时间序列模型,对火灾发生趋势进行分析,并从预防控制时间上提出相应的防控建议。     

基于RCS序列的助推段弹道导弹识别

在弹道导弹的助推段,通过低分辨率雷达得到RCS序列作为识别的重要信息。由于运动特性和电磁散射特性的差异,弹道导弹在助推段的RCS序列与其他目标相比具有可识别性,但需要对其RCS序列进行处理。基于目标识别技术,详细阐述能从RCS序列中提取出的特征参数,并通过直方图、N点截图等方法给出了直观的反映。最后,将弹道导弹助推段特征与飞机、燃料舱等典型目标进行对比,得到可以作为识别参量的特征参数,并通过类内类间距离验证了有效性。     

Callable products for an implicit time model with dependent demands

Capacity providers such as airlines and hotels have traditionally increased revenues by practicing market segmentation and revenue management, enabling them to sell the same capacity pool to different consumers at different prices. Callable products can enhance profits and improve consumers' welfare by allowing the firm to broker capacity between consumers with different willingness to pay. A consumer who buys a callable product gives the capacity provider the right to recall capacity at a prespecified recall price. This article studies callable products in the context of the model most commonly used in industry, which handles time implicitly imposing fewer restrictions on the nature of randomness compared to the Poisson arrival process favored in academia. In the implicit time model, capacity providers set booking limits to protect capacity for future high-fare demand. Our numerical study identifies conditions where callable products result in significant gains in profits.     

顾及噪声影响的GNSS高程序列预测Prophet方法

全球导航卫星系统(global navigation satellite system, GNSS)高程时间序列具有非平稳、非线性、含噪声等特点,在深入研究Prophet预测模型的基础上,针对Prophet预测模型对于趋势信号和周期信号有良好预测效果这一特性,提出一种引入经验模态分解(empirical mode decomposition, EMD)的“降噪—分解—预测”组合GNSS高程时间序列预测方法。该方法先将原始时间序列进行EMD降噪,再对降噪后的序列进行分解预测,最后重构各分量预测信号为最终预测序列。通过对实测高程数据进行研究,实验结果表明：降噪后信号的平均信噪比为10.30dB,能量百分比平均为88.75%;利用所构建的短期预测方法,GNSS高程时间序列预测结果的均方根误差分别平均提升26.41%和14.88%;平均百分比误差分别平均提升18.92%和7.91%,验证了组合预测方法的有效性及实用性。     

A dual criteria sequencing problem with earliness and tardiness penalties

We consider the problem of sequencing n jobs on a single machine, with each job having a processing time and a common due date. The common due date is assumed to be so large that all jobs can complete by the due date. It is known that there is an O(n log n)‐time algorithm for finding a schedule with minimum total earliness and tardiness. In this article, we consider finding a schedule with dual criteria. The primary goal is to minimize the total earliness and tardiness. The secondary goals are to minimize: (1) the maximum earliness and tardiness; (2) the sum of the maximum of the squares of earliness and tardiness; (3) the sum of the squares of earliness and tardiness. For the first two criteria, we show that the problems are NP‐hard and we give a fully polynomial time approximation scheme for both of them. For the last two criteria, we show that the ratio of the worst schedule versus the best schedule is no more than . © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 422–431, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10020     

几种带补偿功能的三光纤传感器的分析

在单光纤对光耦合模型的基础上 ,研究了三种带补偿功能的三光纤反射式位移传感器 ,建立了通用的光耦合的数学模型。仿真研究了它们的位移特性 ,并比较了它们的优缺点。研究结果表明 ,采用三光纤的光纤位移传感器不但线性范围、位移灵敏度和线性度等特性得到较好改善 ,而且可以有效地消除光源功率波动和反射面的反射率变化等因素对位移测量的影响